Article ID : 00068747 / Last Modified : 11/04/2018

How to connect the BRAVIA Smart Stick to a cable box or satellite receiver.

Connecting BRAVIA Smart Stick to a cable box or satellite receiver.

Applicable Products and Categories of This Article

NOTE: Prior to following the steps in this solution disconnect the HDMI® cable that connects your TV to the cable box or satellite receiver.

  1. Using a Micro HDMI cable, connect the micro HDMI connection to the HDMI IN on the BRAVIA® Smart Stick.
  2. Connect the other end of the Micro HDMI cable to the HDMI OUT of the cable box or satellite receiver.
    Micro HDMI to box
  3. Connect the IR blaster to the IR BLASTER connection on the Smart Stick.
  4. Place the other end of the IR blaster on the cable box or satellite receiver.
    IR blaster connection
    NOTE:
    Make sure the IR blaster is pointing toward the infrared receiver (same place where you have to point the remote) on the cable box or satellite receiver.
  5. Connect the Smart Stick to the TV .