Skip to Content
HIGH-RESOLUTION AUDIO STEREO AMPLIFIER

Full Specifications & Features

TA-A1ES

RM 5,999.00

(MYR Inc. GST)
Dimensions (W x H x D)
430 x 107.5 x 365mm
Weight
18 Kg
Speaker Impedance
4ohm-
Frequency Response
20Hz-100KHz
Signal-to-Noise Ratio
100dB
Output (DIN)
80W+80W
Power Requirement
230V
Input and Output Terminals
Analog Audio Input (5), Headphone Output, IR Repeat In (1), Speaker Output

Features

Picture of High-Resolution Audio Stereo Amplifier

High-Resolution Audio

High-Resolution Audio takes your digital music to another level. By converting analogue music to digital at a higher rate than CDs – 24-bit/192kHz, as opposed to the 16-bit/44.1kHz rate of CDs – High-Resolution Audio is able to deliver better than CD quality sound, so you can get closer to the original studio recording.

Picture of High-Resolution Audio Stereo Amplifier

FET input buffer

The amplifier has been fitted with a FET input buffer and discrete circuit for the pre-amp. This reduces the effects of distortion while enhancing the sound quality of High-Resolution Audio.

Optimum gain volume control

We’ve combined the electronic volume with a discrete buffer amp – co-developed with Sony – to enhance the overall sound quality by reducing the gain error experienced by conventional amps.

Smart BIAS

The built-in smart BIAS system controls the amp’s BIAS based on the volume position. In doing so, the amp is able to utilise a field that experiences good transistor linearity without generating heat, so the sound quality always remains true.

Simplified power amp circuitry

By including fewer transistors and eliminating the emitter resistor and coil & capacitor needed in the amp’s final stage circuitry, we’ve reduced the distortion that affects the quality of your music. This means the amp can deliver a higher power output, so you can push up the volume and enjoy great, undistorted, High-Resolution Audio.

Picture of High-Resolution Audio Stereo Amplifier

Make a secure connection

Poor component connections can have a significant impact on overall sound quality. The new screw-type terminals and deluxe quality shaved pin, 18mm pitch jack ensure a tight, secure fit between the amp and your components, reducing the chances of sound degradation.

Independent HP-AMP

To reflect the growing popularity of premium-quality headphones, this amp includes a specialised discrete amp with gain optimised to match headphone impedance.